iView Lite Instructions

This document describes the process of entering the details and connecting the wearable device on the LITE version of the iView app.

Step by step guide

The app can be downloaded from App Store or Play Store.

To connect the wearable device, tap the watch icon which will be showing as red (disconnected), at the top right of the app.

You will be asked to allow Bluetooth permission. The user must accept this permission in order to connect the wearable device (watch).

Tap the add device icon near the top of this page. You will be prompted to confirm that you would like to connect a new device. Tap OK. You will be taken to the connect iView watch page which is where you will search and select the wearable device.

Tap the “SEARCH FOR WATCH” button. This should find any wearable devices within the vicinity. Tap the device that you want to add. This will configure bind and configure the watch with the details you entered when you started the app for the first time.

You will be taken back to the device screen once connected. You will notice that the watch icon which was previously red will turn orange to indicate the wearable device is connecting, and then turn green to indicate that the wearable device has connected successfully.

You have the ability to enter blood pressure readings from an external blood pressure device into the iView Health Lite App. To do this tap the user icon on the left of the app.

You will see an option for "Calibrate Blood Pressure". Tap this option.

You will see that there are two values to input here. The first is the Systolic reading and the second is the Diastolic reading. The values you should input here are that of the values taken from an external blood pressure device.